|
Build Your Own Computer Case
Build Your Own Computer : What to Look for in a Case
Below, you'll find extensive information on leading build your own computer case articles and other information to help you on your way to success.
On this site, discover build your own computer case, COMPUTER FREE GAME KID ONLINE and related issues.
Build Your Own Computer : What to Look for in a Case
By Stephen Bucaro
Why would you want to build your own computer' Not to save
money. With a decent manufactured computer costing less
than $400.00, it will cost you more to buy the parts to
build your own. There are five advantages to building
rather than buying.
1. Most manufactured computers are build using proprietary
components. When (not if) your computer breaks down, you
can't use off-the-shelf replacement parts. You have to pay
a lot more for the manufacturer's proprietary replacement
parts.
2. Low cost manufactured computers use the cheapest
components. These components are marginal or below
specifications. When you build your own computer, you
select the quality of each component.
3. When you have built your own computer, you are more
knowledgeable and capable of performing your own
troubleshooting. You don't have to pay $75.00 per hour for
a service technician.
4. When your computer becomes outdated, you can easily
upgrade it yourself. You will be a better judge of when
its more logical to build a new computer from scratch, or
Here we explore the issue of build your own computer case right here. To learn more about build your own computer case, read on.
to update the old one.
5. You will feel the pride and confidence of having built
your own computer. And, you will have proof that you
really are smarter than your friends!
Yes, you can build your own computer. Today's
plug-and-play mother boards with on-board video, sound,
and network circuitry make it easy. You can build your own
computer in 90 minutes. 30 minutes to build the computer
plus an hour of waiting while installing the operating
system.
When I build a computer, the first component that I
consider is the case. Here is what to look for in a case:
* The form factor
Make sure your case style matches the form factor of
available motherboards. Most motherboards today are the
ATX form factor. You should buy an ATX style case. Do not
buy an AT style case. The AT style case has been obsolete
for years. Some computer component providers are trying to
unload their obsolete AT style cases to inexperienced
computer hobbyists.
* The power supply
Don't buy a case with only a 200 or 250 watt power supply.
A 300 watt power supply should be sufficient, but if you
plan to install a lot of expansion cards like 3D graphics
accelerators, multiple hard drives, CD burners, etc. then
you need to consider a case with a more powerful power
supply.
A Pentium 4 motherboard uses an extra four pin connector
to provide extra 12 volt power required for the CPU. If
you plan to build a Pentuim 4 based computer, make sure
the case has a "pentuim 4 ready" power supply.
* Drive bays
The minimum drive bay requirement is; one 5.25 inch
external bay, one 3.5 inch external bay; and one 3.5 inch
internal bay. This allows you install a CD-ROM drive,
a floppy drive, and a hard disk drive.
However, I would recommend purchasing a case with; two
5.25 inch external bays, one 3.5 inch external bay; and
two 3.5 inch internal bays. This gives you a little extra
expansion capacity.
* Side Panel
Get a case ......
Check the Sitemap for more information on Build Your Own Computer Case and related articles and resources.
Read More ...
#USERCODE2" |
